A Stone Eye

A trip to Plainfield, Vermont in the F450 last week netted a dump load of wall stone from Mitchell’s Quarry. The quarry’s bedrock is a layered mix of quartzite, a granular metamorphic rock, and phyllite, a slaty rock with minute scales of mica.

Yesterday, I built some of the stone into a short wall to test its quality. The hope was that it would be good material to use in the stone-eye sculpture construction because the quarry is located a reasonable distance from the project site, and because the stone is generally planar. Since the construction will be vertically bedded walling, the stone needs to have flat surfaces for maximum contact. I must also be able to trim and shape its edges with a hammer. The test walling proved the stone acceptable in most aspects, but thicker pieces tended to fracture along cleavage planes when I struck an edge with multiple hammer blows.

Today I’m transferring information from 60 pages of data onto a master plan for the stone-eye construction. Corner points in a grid of 6” squares are given numerical values that correspond to their position on the surface of the sculpture. The 32’ diameter sculpture will require more than 3,000 points-in-space to guide the construction.

© All rights reserved Dan Snow In the Company of Stone

, , , , , , , , , ,

2 Responses to A Stone Eye

  1. Dan Snow December 5, 2011 at 8:37 pm #

    The craft of dry stone is problem-solving. The art of dry stone is the creation of new problems to solve. Thanks for checking in, Chuck.

  2. Chuck Eblacker December 5, 2011 at 4:10 am #

    Very inspiring Dan! Your process is ever evolving. Its gonna be a real treat to see this this come to life. All the best, Chuck

Powered by WordPress. Designed by Woo Themes